What BM-360 is
A fencer's price book, job list, and invoicing, covering new fencing, gates and repairs, and retaining or screening work.
Trades
Fencer quoting software for new fences, gates, and repairs
A timber fence quoted per linear metre and a gate that just needs realigning should not need two different quote methods. Measure once, price from the book, and send it from the job.
Timber fence (per linear m)
Colorbond fence (per linear m)
Paling / panel replace (section)
Gate supply & install
Priced by the metre, and by the gate
From a gate repair to a full new fence
A gate realign and a new colorbond fence both sit in the same price book, priced per linear metre or per job depending on the work.
On the boundary or at home
Measure a fence line on site and quote it there. Set your per-metre rates from home between jobs.
Long runs priced properly
A full new fence is priced per linear metre from the same line you use for a short repair, so long runs never get guessed.
Your week
Measured on site, quoted the same day
Fencing quotes are only as good as the site measure behind them.
What goes wrong
You measure a boundary, quote a round number, and the real length only gets checked once you are back at the laptop.
How a job runs with BM-360
The measure-and-quote enquiry lands on your job list, priced per linear metre from the book.
What the week looks like
Gate repairs and full new fences sit on the same list, and the invoice matches the length you measured.
Price book
Jobs already named for fencers
New fencing, gates and repairs, and retaining work are already listed, priced per linear metre or per job. Set your own rate per material and length.
New fencing
- Timber fence (per linear m)
- Colorbond fence (per linear m)
- Paling / panel replace (section)
Gates & repairs
- Gate supply & install
- Gate repair / realign
- Post replacement (each)
Specialty & assess
- Retaining / sleeper edge
- Boundary check coordination
- Site measure / quote
- Pool fence compliance check
Posts & panels
- Post & concrete pack
- Panel / paling allowance
- Gate hardware pack
Retaining & screening
- Sleeper retaining (short run)
- Privacy screen
Add-ons
- After-hours / evening surcharge
- Same-day attendance
- Rubbish / disposal allowance
Other business types
More in Trades
Each type has its own jobs and prices. If Fencer is close but not quite right, try another in this group, or see all business types.
Plumber
Built for plumbers, covering residential call-outs: taps, drains, hot water, and toilet repairs with fixed or banded pricing.
Electrician
Built for electricians, covering common install and safety jobs with fixed prices or price bands.
Handyman
Built for handymen, covering small repairs, assembly, and odd jobs with hourly or fixed pricing.
Carpenter
A door that needs rehanging and a pergola that needs quoting on measure should not run through two different systems. Price the common jobs, then quote the custom ones from the same book.
Painter
A single room repaint and a full exterior job should not be quoted on two different scraps of paper. Price both from one book, and send the figure before you leave the driveway.
Tiler
A cracked tile that needs replacing and a full bathroom retile should not run through two different quoting habits. Price the small jobs and the big ones from the same book.
Roofer
A leak that needs a temporary seal today and a full re-roof that needs quoting properly should not need two different systems. Price both from the one book.
Plasterer
A small hole that needs patching and a full room that needs sheeting should not be quoted from two different mental price lists. Set the rate once, per job or per metre.
Concreter
A garden path this morning and a driveway pour this afternoon should not need two different quote habits. Price both per square metre, from the same book, before you drive off.
Landscaper
A garden bed makeover and a full landscape rebuild should not both need a site visit before you can say a number. Price the common jobs per square metre, and quote the bigger ones from the same book.
HVAC / air conditioning
A no-cooling call in summer and a multi-head install booked for next month should not run through two different quoting habits. Price both from the same book.
Appliance repair
A fridge that has stopped cooling and a washing machine that needs a part should not both need a separate diagnostic write-up before you can quote. Price the common faults once.